Combining the Advantages of Depth Cartridge and Traditional Pleated Cartridge
Innovative Fusion of Depth and Pleated Technologies Delivers Superior Performance when Rmoving Gels
Proprietary Gel Capturing Filter Media-Geltrap 
High Surface Area for Long Service Life 
Micro Denier Melt Blown Fibers for High Efficiency Filtration
Absolute Rate at>99.9% Efficiency With Retention  
High Flow Rates with Low Rressure Drops
All Polypropylene Construction
Manufactured in a Clean Room Environment-Class 10000
Manufactured Under a Certified ISO-001 Quality System

Specifications
Materials of Construction:
Filter Media:                                    Polypropylene 
Hardware:                                        Polypropylene
Cage/Netting:                                    Polypropylene
Surpport Material:                               Polypropylene
End Caps:                                        Polypropylene
O-Rings:                                         EPDM,Viton,Silicone,Buna-N,Teflon Encapsulated Viton
Dimensions(nominal):
Outside Diameter:                                2.67"(68mm)
lengths:                                         4"(102mm),9.75"(248mm) , 
                                                 10"(254mm) ,19.5"(495mm)
                                                 20"(508mm) ,29.25"(743mm)
                                                 30"(762mm) ,39"(991mm)
                                                 40"(1016mm)
Surface Area :
Up to 2.5ft2(0.23m2) of Effective Filtration Area per 10"(254mm) Equivalent Depend on Micro Rating

Performance
Retention Ratings:                                 1,3,5,10,20,30,40μm Absolute
Maximum Operation Pressure:                        70 psid(4.8 bar)@ 120℉(49℃)
                                                   40 psid(2.8 bar)@150℉(65℃)
Recommended  Change Out Differential Pressure:     35 psid(2.4bar) 
FDA listed Materials:
Manufactured from Materials Which are FDA Listed for Food Contact Applications in Title 21 of the U.S.Code of Federal Regulations
Toxicity
All Components Meet the Specifications for Biological Satety as per the USP for Class VI-121℃ Plastics (Gaskets/O-rings Excluded )
Purity:
Cartridges are Free of Surfactants,Resins,Binders and Adhesives
Sterilization: 
Multiple Autoclaving for 30 Minutes at 250℉(121℃) under no End Load Conditions.In-line Steam Sterilization is not Recommended.May be In-line Sanitized with Hot Water at 180℉(82℃) for 1 Hour

Applications
Electronic Industry:  Pre-filtration for Industry High,Purity Water
Food and Beverage Industry:Wine,Mineral Water,Potable Water etc.
Ink filtration
CMP filtration
Chemical Industry:Various  Organic Solvent 、Acid Liquid and Alkaline Liquid